Description
AW-D302 Addressable Heat Detector (Detector hereunder) is a mated product of the AW-FP300 fire alarm control panel. It uses a two-bus work mode. With an internal microprocessor, it supports electronic coding. The detector realizes real-time acquisition of the in situ temperature data and sends back the data to a fire alarm control panel. It can also receive and execute the control commands given by a fire alarm control panel. When in a routine inspection, the detector indicator will blink. When there is a fire in the monitored area and the temperature has reached the alarm threshold, the fire alarm control panel will confirm a fire alarm according to the received message sent from the detector, and the detector indicator will light at the same time to indicate a fire alarm.
The detector is suitable for such industrial and civil buildings that have a great deal of heat when fire takes place, such as kitchens, boiler rooms, generator rooms, drying workshops and smoking rooms and is not suitable for places with a great deal of smoke but little heat.
Technical Specifications:
Operating Voltage | Loop 24V(18V~28V) |
Standby Current | <0.3mA |
Alarm Current | <1.5mA (without remote indicator) <3.5mA (with remote indicator) |
Class | A2 |
Fire LED | Red, Flash in polling, and illuminate in alarming. |
Remote indicator output | Polarity-sensitive output, directly connect to remote indicator (built in 10k resistor in series, max. output current is 2mA); The red indicator will blink in the monitoring status or remain lit in the alarm status. |
Programming | Electronically addressed. |
Programming Range | Occupying one address within 1~324. |
Wiring | Loop: two wire, polarity-insensitive |
Environmental Temperature | -10℃~+50℃ |
Relative Humidity | ≤95%, non-condensing |
Material of Enclosure | ABS |
Dimension | Diameter: 100mm Height: 60mm(with the base) |
Mounting Hole Distance | 44.5mm~64.3mm |
Weight | About 115g(with the base) |
Certificate | CE, LPCB |
METLEAF WARRANTY, GUARANTY বিক্রয়োত্তর সেবা
Warranty Guarantee Is Not Applicable Following Reason:
- If Product Open By Locally Or By Any Person.
- Any Accidents, Lighting, Fire, Public Disturbance, Voltage Fluctuating.
- If Panel Is Broken.
- Defects Caused By Improper Use or Improper Installation.
- Any Short Circuit Damage.
For Guarantee & Warranty Service:
- Send Your Product to Our Office Address (By Any Person)
- Send Your Product by Any courier Service to Our Office Address.
- After Servicing (Guarantee & Warranty) We Will Send Your TV to your Nearest Courier Service (Customer Will Bear All Up Down Cost Of The Product).
- Service Center Mobile No: 017821-75152
বিক্রয়োত্তর সেবা প্রদানের জন্য (Guaranty & Warranty):
১. আপনার Product কোন সার্ভিস প্রয়োজন হলে দয়া করে Productটি আমাদের অফিসের ঠিকানায় পাঠিয়ে দিবেন।
২. আপনি নিজে Productটি নিয়ে আসতে পারেন আথবা, কোন কুরিয়ারে সার্ভিসের মাধ্যমে আমাদের অফিসের ঠিকানায় প্রেরণ করুন।
৩. আপনার Productটির সার্ভিসিং (Guarantee & Warranty) হয়ে গেলে আমরা আপনার নিকটস্থ কোন কুরিয়ার সার্ভিস সেন্টারে পাঠিয়ে দিবো। (পরিবহন সংক্রান্ত যাবতীয় খরচাদি ক্রেতাকে বহন করতে হবে)
- Please Check First Then Receive Your Product. You Should/Will Receive Your Product At Your Own Risk.
- After Receiving The TV, Our Company Will Not Take Any Other Responsibility About Configuration Except The Service Issue.
- দয়া করে প্রথমে যাচাই করুন অতঃপর আপনি আপনার নিজ দায়িত্বে আপনার পণ্যটি বুঝে নিন।
- আপনার পণ্যটি বুঝে নেওয়ার পর থেকে কনফিগারেশন সম্পর্কিত কোন দায় দায়িত্ব আমাদের কোম্পানি গ্রহন করবে না। কিন্তু সার্ভিস সংক্রান্ত যে কোন সেবা আমাদের নির্দিষ্ট মেয়াদ পর্যন্ত প্রদান করা হবে।
Reviews
There are no reviews yet.